
Overview
The FS-i6S is a 10-channel 2.4GHz transmitter made by FLYSKY. It has a capacitive touchscreen, a built-in dual antenna and the AFHDS 2A protocol. This is the transmitter that comes with FLYWING helicopters sold as RTF with FS-i6S.
Works With
- ACE flight controller
- H1 flight controller
- H1 Pro flight controller
- H2 flight controller
PairReady helicopters are not compatible with the FS-i6S. They need the FY-RC02 transmitter.
Key Features
- 10 channels on 2.4GHz with the AFHDS 2A protocol
- Capacitive touchscreen
- 4096 channel resolution
- Built-in dual antenna
- Supports PWM, PPM, i-BUS and S.BUS receiver outputs
- Works with USB flight simulators
- Firmware can be updated online
- Runs on four AA batteries, with a low-voltage alarm
Setup with a FLYWING Flight Controller
The channels are already assigned, so there is nothing to map. Connect the flight controller to its setup software, check the channel directions and calibrate the stick travel before the first flight.
Availability
The FS-i6S is not sold separately at the moment. It is included with helicopters sold as RTF with FS-i6S. The receiver used with it is the FLYSKY FS-iA6B, a 6-channel 2.4GHz receiver.
Specs
- Model
- Transmitter
- Channels
- 10
- Frequency
- 2.4GHz
- Protocol
- AFHDS 2A
- Transmission Power
- Less than 20 dBm
- Channel Resolution
- 4096
- Display
- Capacitive touchscreen
- Antenna
- Built-in dual antenna
- Receiver Outputs Supported
- PWM, PPM, i-BUS, S.BUS
- Battery
- 4 × 1.5V AA
- Low-Voltage Alarm
- Below 4.2V
- Charging Port
- None
- Data Port
- PS/2 (PPM)
- Simulator
- USB simulator supported
- Firmware Update
- Online
- Menu Languages
- English, Chinese
- Operating Temperature
- 14°F to 140°F (-10°C to 60°C)
- Operating Humidity
- 20% to 95%
- Dimensions
- 179 × 81 × 161 mm (7.0 × 3.2 × 6.3 in)
- Weight
- 410g (14.5 oz)
- Color
- White
- Certification
- CE, RCM, FCC
- Compatible Flight Controllers
- FLYWING ACE, H1, H1 Pro, H2